? rhopoint components ltd , hurst green, oxted, surrey, rh8 9ax, uk t +44 (0) 870 608 1188 sales@rhopointcomponents.com www.rhopointcomponents.com technical datasheet temperature sensors ? response time down to 1ms (grounded) ? low mass giving low thermal inertia (butt bonded construction) ? flexible will bond to flat or curved surfaces ? may be used with any standard readout equipment butt bonded thermocouples 20100 series these thermocouples have their free filament supported on a temporary polyimide film carrier. this is a tough, flexible and dimensionally stable material rated at 260?c continuous. during installation the carrier can be peeled from the sensor or released by the application of heat, alternatively parts of the carrier may be cut away with scissors or a knife. designed primarily for application with ceramic cements. the free foil thermocouple can be easily brushed into a thin layer of cement following application and drying of a thin insulating layer if an ungrounded junction is required. dimensions in mm 20100-1 type k 0.005 0.025 x 0.76 -160 to +815 20100-2 type k 0.013 0.05 x 0.76 -160 to +815 20101-1 type e 0.005 0.025 x 0.76 -160 to +650 20102-2 type t 0.013 0.05 x 0.76 -160 to +370 part thermocouple foil leads temperature number type thickness (mm) (mm) range ?c 20113 type e 0.013 0.25 -195 to +260 20114 type t 0.013 0.25 -195 to +260 part thermocouple foil leads temperature number type thickness (mm) (mm) range ?c p r e c i s i o n i n e l e c t r o n i c s
|
